PREPARATION :
Make sure your nails are clean and free of gel polish. Wash your hands thoroughly with soap, then clean your nails with a cleansing wipe.
INSTALLATION WITH ADHESIVE UV PATCH:
1. Choose the size of UV adhesive patch suitable for your nail.
2. Apply it to the natural nail, removing any air bubbles.
3. Remove the protective film. Then position the false nail at the base of the nail, tilted at a 45° angle, leaving about 1 mm of margin at the edges. Slowly lower it while pressing.
4. Shine the LED/UV light on your nails: 120 seconds for solid colors, 20 seconds for transparent colors. Move the light around 360° until the false nail is secure. That's it, it's ready!
REMOVAL OF FALSE NAILS:
1. Spray disinfectant alcohol on the edge of the false nails and leave it on for 1 minute.
2. Gently lift the false nails from the edge using a manicure stick. You can continue to spray alcohol throughout the process until the adhesive is completely dissolved. Gently slide them off without forcing. And there you have it, done!
3. After removing the false nails, use a glass file to buff the surface of your nails, if necessary.
STORAGE CONDITIONS:
Store UV patches away from direct light to avoid premature hardening caused by the sun's UV rays.
WARNINGS:
Keep out of reach of children.
It is not recommended to wear false nails for more than 7 days.
